best way to keep light strips attached in car

You normally will not see the tabs once secured to the vehicle. The last step is to drill the hole for the clip or bolt to go through to attach it to the vehicle. Once the tab is fully hardened (about 5 minutes) remove plastic from around the tab and shape the tab using the 50 grit roloc disc, followed by 80 grit by hand or on a dual action sander. Then allow to finish drying about 5 minutes. Step 8: Precut TabĪfter a minute or two, before completely drying, precut the tab a little larger than the tab size. The release pressure on spreaders and allow to finish drying. Allow to set-up 30 seconds to one minute. Do not apply too much pressure, as this will build a tab that is too thin. Lastly, lightly apply pressure using a spreader on the top of the adhesive to shape the tab. Make sure the plastic extends past the original length of the plastic tab. Next, wrap the plastic around the tab location. Apply adhesive to the plastic, then lightly press the adhesive to the backside of the repair. Support the bottom of the plastic using a spreader. Step 7: Cut Plastic and Apply AdhesiveĬut a piece of plastic from the package the tab repair adhesive came in to shape the adhesive. Allow the adhesion promoter to dry for 5 to 10 minutes. This is important so the adhesive adheres to the repair.

Spray a light coat of adhesion promoter to the repair area. Do not use any type of solvent cleaner, as this can absorb into the plastic, which will cause problems. Using compressed air, blow the repair area clean. This will allow the adhesive to flow from one side of the repair to the other side providing a rivet like effect. Step 4: Drill Holesĭrill holes on repair location using a 1/8 inch drill bit. Do not apply adhesive on an un-sanded surface. Using 80 grit by hand or 80 grit on a dual action sander, sand the repair area to assure all areas the adhesive will come in contact with is sanded. This will provide the correct shape to maximize adhesion. Where the tab broke, use a 50 grit roloc disc to grind the repair area to a point. This will assure all silicones are removed which will provide a quality repair. Start the repairs with a good wash to remove contaminates on the bumper cover. It creates a soft color that is easy on the eyes and slightly dimmer than cool white.Please enable JavaScript to watch this video. Warm white: This type of LED strip light may have a slightly yellowish or orangish tinge.They are very bright and have an appearance similar to natural daylight. Cool white: Cool white LED lights may appear slightly bluish or purplish.Different LED bulbs may give off slightly different hues. Not every shade of white is exactly the same. You can typically clip and fold these LED strip lights to customize the length and shape of the lighting. Flexible strip: This looks like a flat strip of tape with small LED lights mounted at even intervals.When lit up, it looks like a shining rope. Light rope: Rope lighting is a hollow tube of clear material with bulbs mounted inside.The strips may have a single line of lights, or they may have several rows stacked on top of each other. Light bar: Bars have a rectangular frame with rows of lights set inside of the frame.You have the option of choosing between these different types of lights: There are a few different ways that LED lights can be mounted for use on a vehicle. What are the different styles of LED lights? Vibration-resistant: Lights with this feature can withstand the vibration from trucks, cars, and boats.Heat sinks: Lights with a heat sink help to spread out and eliminate high temperatures, so excessive heat does not collect in one area.Controllable settings: You may have the option of switching between different settings like spot lighting and flood lighting.Waterproof: Items with a waterproof coating can resist damp weather.Multi-colored: With some styles, you have the option of cycling through other colors besides white while the LEDs are turned on.Adhesive backing: Lighting with an adhesive backing allows you to stick it on any desired surface without having to resort to screws and other installation methods.You can find lights with one or more of the following features: There are many different styles available, so you should carefully read the manufacturer's description to see what options are included. What features are available with LED light strips?

With plenty of helpful options like waterproof coatings and heat sinks available, you can find the right strip lights for your needs. You can create a fun, glowing underbody for a car or attach bright floodlights on a truck. White LED lights are a versatile way to improve the appearance of your vehicle, and they can be installed on any part of a car in just a short amount of time. Light Up Your Vehicle With White LED Light Strips

Best way to keep light strips attached in car